A question about curb chains / straps

PapaFrita

Well-Known Member
Joined
25 August 2005
Messages
25,914
Location
Argggggentina at the moment
pilar-larcade.com
Umm, feel really daft asking this, but how do they work? Is it their purpose to restrict the movement (angle) of the curb bit? Does putting the curb on looser/tighter make the action more/ less severe? OR does the tension increase/decrease poll action???????
Most horses at our yard wear curbs (in the manner of western horses) and people seem to think that the curb has to be really tight to make the bit effective?
Would appreciate some patient soul explaining the mechanics of the curb bit plus strap/chain. Thankies very much.
 

flyingfeet

Well-Known Member
Joined
16 March 2006
Messages
8,073
Location
South West
Visit site
A curb puts pressure on the back of the horses jaw - either in the curb groove or higher if set on a hackamore / gag.

Its all a case of leverage - so the tighter the curb the sooner it comes into action. The longer the shanks on the bit the more pressure is applied.

In english riding, you would ideally leave around two fingers space between the curb the horse. Do this up tighter makes it more severe, but means that you stop more on the curb than the bars of the mouth. So it can be useful if yo have a sore mouth, or want to give the mouth a rest.

However jumping with a tight curb is a bad idea, as they will not appreciate it if you catch them in the mouth with a tight curb.

You can also vary effectiveness with the type of curb -the double link english curb is actually the most severe, then the wide link polo chains are milder due to larger surface area. Then leather curb straps tend to be less sharp and finally elasticated curbs are very mild.
 

PapaFrita

Well-Known Member
Joined
25 August 2005
Messages
25,914
Location
Argggggentina at the moment
pilar-larcade.com
Okeedokee, thanks for that
smile.gif
most helpful
smile.gif
 

oldbear

Well-Known Member
Joined
12 July 2001
Messages
52
Location
uk
Visit site
If the bit has a high port having the chain loose would cause the port to hit the roof of the mouth.
Always check for the correct tightness ie when the reins are pulled gently the bit should be at 45 degrees.
So to answer not always having a loose chain is kinder.......
 

Tia

Well-Known Member
Joined
21 January 2004
Messages
26,100
Visit site
[ QUOTE ]
If the bit has a high port having the chain loose would cause the port to hit the roof of the mouth.


[/ QUOTE ]
Good point Oldie - most of the crowd I go around with use Tom Thumbs (no port).
 

Tia

Well-Known Member
Joined
21 January 2004
Messages
26,100
Visit site
The bit lies naturally at 45 degrees in the horse's mouth. LOL!!

Wasn't sure how to answer your next question because I do believe you are having a bit of a blonde moment......
grin.gif
45 degrees from level. Pull on the shanks and it will go to a higher degree unless the curb is tight.
 
Top