Removing a trailer partition

[Alex_kate]

see my post in the comp riders for the reason!

I am removing the centre partition from my Ifor 510

So, where do i start!! do i need any tools? is it easy? any help would be greatly appreciated!!!


Thanks

 

[tibby]

Hi , You will need a stool or a set of steps unless you are very tall, firstly remove all 4 bars then lift the font section off the central pole, you might need to turn it first, then repeat with the back, now for the steps, you might need a piece of string to pull the " R " clip off the top pin, tilt the pole forward and carefully lift from the slot in the floor be very careful not to ram it through roof, lift out , when you have got the pole out put the pin and "R" clip back in for safe keeping! Hope this helps.

 

[Alex_kate]

thats brill thanks, have printed that so will take it with me tonight!!