scissoring a mane............

cobface

Well-Known Member
Joined
26 January 2010
Messages
956
Visit site
I like my TBs mane slightly longer as it looks better when i plait her up and since we are competiting this winter would like to leave it how it is. If i pull it it goes thin so am looking to neaten with scissors, have seen it done before on here and it looks good, any tips on using scissors the *proper* way? :D
Thanks
 
I do this if I have any that don't like having their manes pulled all I do is back comb as if your going to pull it then cut the piece you would normaly pull. Once u get the hang of it it's easy and most of the time u can't tell a diffrence
 
Ah right so sort of cut upwards into it then?
Like you would when you thin/give texture human hair? (sorry am a hair dresser :) )
 
I normaly use one blade of the scissors and kind of razor it off (if that makes any sence at all) to the length I want it. I had to do it with Horrids mane before the show we went to. He's a forester so can't pull it but he rubbed half his mane out in the winter with his rug. This gives it a natural look as obviously you don't pull an M&Ms mane. ;) :D
 
If you can get one, a shearing comb (for sheep) can be used to shorten manes. Just backcomb a few strokes, then draw it downwards to razor off the long ones you're holding onto. I'm much better at this than I am at solocombing and I've not really had manes that required thinning, so the result is much more even and it looks 'naturally short' rather than fluffy or lopped off.
 
Always do it dry as well, never wet, otherwise it won't look the same after it's dry and sprung back into normal position.

Do a bit at a time, rather than taking an inch off, remember you can't glue it back on :D so better to take small amounts off until your happy with the length.

Do a normal chop to take the length off, take the underside a bit shorter.

Then use thining scissors but also chop into to it a bit to give a more natural look, however, if you do this, you won't get nice ends to roll up when you plait, so this is not always advisable, but it does look better for when the mane is normally down.
 
I normaly use one blade of the scissors and kind of razor it off (if that makes any sence at all) to the length I want it. I had to do it with Horrids mane before the show we went to. He's a forester so can't pull it but he rubbed half his mane out in the winter with his rug. This gives it a natural look as obviously you don't pull an M&Ms mane. ;) :D

being as he is going so well with you now, can you not call him Herbie?
 
Dog thinning/ stripping comb off e-bay about £14, sold for horse use cost twice as much.
To thin and shorten use on whole length of mane, to shorten just comb the ends. Takes about 10 to 15 mins to do a whole mane and the horse just thinks it having it combed.
My horse came back from a weeks livery with a nice short mane but a real phobia about having it pulled as they had made him so sore, these stop all the stress so now I use it on them all. I show natives so it gives a natural look.
 
I was going to recommend a solocomb or thinning blades, but since you're a hairdresser I'm sure you will have no problems with the scissors :D
 
Top