1994 Bateson deauville rewire.

[Wills87]

Apologies if this has been asked before. I have just purchased a 1994 Bateson deauville the problem is it needs a full rewire so I’m taking the opportunity to install 13 pin electrics so I can install new LED lights all round with the edition to add two loading lights. So I guess the question is has anyone done this? If so did they purchase a full kit or is it a case of buying it all separately and putting it together on the trailer? Any advice very welcome Tia.

 

[COldNag]

Can't offer rewiring advice- but I have found Bateson really helpful for advice and spares, so I would recommend ringing them.

 

[Dexter]

Its incredibly easy to do. I dont know where the wires run in a Batgeson, so that might be the only fiddly bit might be running the new wires underneath.

You can buy a kit, they arent expensive and its all there then. You will probably have to buy the loading lights separately. I get mine from ebay. They are cheap but exactly the same as more expensive kits.

 

[Wills87]

Its incredibly easy to do. I dont know where the wires run in a Batgeson, so that might be the only fiddly bit might be running the new wires underneath.

You can buy a kit, they arent expensive and its all there then. You will probably have to buy the loading lights separately. I get mine from ebay. They are cheap but exactly the same as more expensive kits.

Do you happen to know what the kits are called or where to buy them from. Thank you.