Helena88
Well-Known Member
am i right in thinking these dont exist?
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
600x16" wheel clamp
- Thread starter Helena88
- Start date
Fifty Bales of Hay
Well-Known Member
Is this a lorry/horsebox wheel?
Helena88
Well-Known Member
landrover on a trailer
Fifty Bales of Hay
Well-Known Member
I've got a wheel clamp that's sitting here not doing anything, that clamps onto a sticky out nut on the wheel. I wonder if that would fit? Can you do a picture, and measure the depth of the wheel to the centre of the nearest wheel nut from the outer edge?
I'll then measure the clamp and see if it might possibly? I'm not that far away so sure you could try it for size to see, if measurements seemed about right?
I'll then measure the clamp and see if it might possibly? I'm not that far away so sure you could try it for size to see, if measurements seemed about right?
Helena88
Well-Known Member
oh that would be great, im taking delivery of the trailer tomorrow so will get measurements then, thanks a lot! xx
Fifty Bales of Hay
Well-Known Member
No problems, will you PM me, as this may drop down a page or two and I'll forget to look back at it, then might miss you? Once you've got the measurements and perhaps a photo showing me where you're measuring, I'll be able to see if mine will be worth trying? I've also got another type I remember, but think the wheelstud pattern has to be right for that one, again once I've seen the wheel I'll have a good idea.