Arrgh. Kent & Masters knee rolls help please?

[NeverSayNever]

i have a k&m jumping saddle and im not sure the knee rolls are on right? do any of you have pics of yours please?

also mine look different to the ones on the K&M website too
http://www.kentandmasters.co.uk/jump.html

musing over mine as have a few new balance issues

 

[corriehorse]

I have no experience with K&M saddles, or anyother make with movable knee rolls, but to me, I would say your knee rolls are on upside down and on the wrong side.

 

[jakkibag]

It almost looks like the blocks are either off a different saddle or off a pony saddle, the stitching looks a bit different to the website and the knee block looks considerably shorter than the website? V, odd!

 

[Sol]

I have a Bates - and stick my knee rolls on wherever they work best At the min they're as high up as they'll go, with part of them stuck out the front of the flap so I could get them just right xD Works for me.
I always sort them out when mounted. But my stirrups to the right length, without the knee rolls. Then look at where my leg is positioned, and place them on in the space around my knee basically. I might then shift them a tiny bit when I'm riding but they're usually fine

 

[charlie13]

i have the kent and masters jump saddle and had the same problem my soloution was to swap the knee rolls at the back to the ones at the front seamed to off work but still not compleatley happy :S but has done the trick till i come up with something els

 

[NeverSayNever]

i have the kent and masters jump saddle and had the same problem my soloution was to swap the knee rolls at the back to the ones at the front seamed to off work but still not compleatley happy :S but has done the trick till i come up with something els

are you having balance problems?