Easy change gullet system? Pah!

arwenplusone

Well-Known Member
Joined
25 January 2007
Messages
6,160
Location
York
www.freewebs.com
Honestly, these guys should be had by trading standards.
tongue.gif


Took 2 of us 30 mins to change the darn thing on a wintec last night - cue some very blue air & a very bemused horse!

Also, I have a wintec where I cannot change the thing because the screws just turn around and around!

Great idea but
mad.gif
at the physicalities of doing it.
Anyone else?
grin.gif
 

piebaldsparkle

Well-Known Member
Joined
26 July 2006
Messages
13,017
Visit site
LOL bet you were trying to get a narrow gullet in!!!

When the screw just goes round, have you got a allen key in the back? or is it the screw that holds the gullet in, in which case you need some lochtight (think that's what its called but would have to double check the gullet changing instruction), or have you sheared of the thread?
 

pinktiger

Well-Known Member
Joined
2 November 2007
Messages
2,681
Visit site
o gr8!!!! just about to change gullet in dressage version for baby horse!!! have been putting it off (had heard they are a nightmare), but am gonna have to do it!!! gonna enlist some helpers i think!!!
 

RachelB

Well-Known Member
Joined
25 December 2004
Messages
6,881
Location
back of beyond
Visit site
Nah it's easy! Definitely more difficult trying to get narrower or wider gullets in though as Wintecs are really built for mediums so it all gets a bit difficult to line the thing up properly!
 

Springs

Well-Known Member
Joined
13 August 2008
Messages
629
Location
Shropshire the undiscoverd county
Visit site
Have changed the gulliets in our Bates a number of times, it's easy.

If your having problems get some one with a mechanical ability to do it. IE if you can change a wheel over on a car with a spare, you will be able to change a gullet over.

good luck
 

Apalacia01

Well-Known Member
Joined
9 January 2008
Messages
1,823
Location
US - Charleston
Visit site
Takes me hours to do mine - cue me on the floor with saddle in bits trying to hold bits open with feet etc etc...and that is trying to change from med to m/w. I think I am just an idiot though.... (lukily, I have only ever had to change it a handful of times!)
 
Top