How can I rig up a similar jump safely?

wench

Well-Known Member
Joined
19 December 2005
Messages
10,260
Visit site
Trying to rig up something similar to this jump ... safely.

Jumpy

I have got hold of some lengths of ducting,just wondering the safest way to put them together as a jump?
 

alsxx

Well-Known Member
Joined
7 January 2006
Messages
3,146
Location
Kent
Visit site
I made an upright (so the pipe things on top of each other) by putting some upright posts in the ground so they were about 3ft and then secured the pipe things between them. Then using rope secured the tops of the uprights.
 

ajn1610

Well-Known Member
Joined
21 March 2008
Messages
1,955
Location
Cheshire
Visit site
Drill and bolt them together from inside then peg them in place as they are quite light and you don't want them to move if you hit them.
 

birdof1977

Well-Known Member
Joined
2 August 2008
Messages
193
Location
North Essex
Visit site
Use beer crates at the bottom ( always a fav of mine).
Tape or tie the bottom two pipes to them and the crates and sit the third pipe on top ( if it gets knocked it should roll off). You might want to weight it at the bottom with something though, or peg it to the gound, or a big gust of wind might blow it over. You could always add some old bike wheels for effect.
 
Top