How to fit grass reins, help please!

[Popos]

I've bought the Libby webbing grass reins. Have previously used bailing twine. I have now idea how to fit these! It is one long piece of webbing with a clip at either end (assuming that's where it attaches to the saddle?) sorry for being a bit dumb!! I can't work it out!

 

[Fiona]

I feed mine through the bit rings and clip onto saddle Ds but I know some are designed to go over poll, through bit rings and clip on..

Fiona

 

[be positive]

It needs to go over the poll, explained below.

http://www.robinsonsequestrian.com/libbys-web-grass-reins-black-one-size.html

 

[Popos]

Thanks for the help. I was unsure whether it went under the jaw from other posts I've found, but I think these are long enough to go over the poll, which is how I previously had the twine. Have followed the pic on here of the blue rein http://polypads.co.uk/product/13450/

 

[Enfys]

It needs to go over the poll, explained below.

http://www.robinsonsequestrian.com/libbys-web-grass-reins-black-one-size.html

"Made from 16mm soft webbing that attaches to the D ring and threads through the bit onto one side and over the head back through the bit and attaches on the opposite D ring. "

This, but attached to the saddle D's rather than girth.

http://www.bing.com/images/search?q...80f93e2abc56e89939c438a84bfd7303o0&ajaxhist=0

 

[Popos]

Thanks, that's really helpful.

Some of the pictures are conflicting. Do i go from inside out or outside in (coming down from the poll) when I loop through the bit? Hope that makes sense!

 

[be positive]

I would go from outside to inside, I think it is less likely to interfere with the reins if going inside at the bit.