Removing liveryman Classic trimmer blades HELP!!!!

[twobearsarthur]

Normally you just unscrew the two little screws on the back of the trimmers/clippers the back falls off and you remove the blades.
The back on this little sucker will not come off and I'm worried if I carry on pulling and tugging I'm going to snap something.
I have googled every phrase I can think off to try and find out how you remove th to no joy.
Please for my sanity help!!!!

 

[TheEngineer]

Hold the trimmer cupped in both hands with the blades facing away from you. Put a soft cloth on the surface under the blades and push firmly forward on the corners of the blade with both thumbs. The blades will "pop" off the body and you can clean them. Do "NOT" attempt to undo any screws, you dont need to. Good luck

 

[twobearsarthur]

Thanks for your post but unfortunately there are no corners to push! the blades are totally flush with the body of the trimmers so there isn't anything to push against and the blades are screwed to the body of the trimmers so without unscrewing them they definitely won't come off. Nevermind
Thanks for your help anyway.

 

[jnb]

Looks like (from photos) they are snap on blades & you push on the actual cutting blades each side of the blades, the snap on blades unsnap as The Engineer describes above.