Thoroughbreds and bits

A

Allykat

Well-Known Member
Joined
13 March 2005
Messages
989
Location
Kent
Visit site
Just being nosey really.....

For those who own or ride TB's what bit do you use??

I've always used a double jointed bit on my TB and although he goes well I feel that he is not 100% happy in his mouth. His teeth have been checked regularly and they are fine. I have tried a few varieties but I was just wondering if there was a TB popular choice out there
confused.gif
 
I ride my boy in a happy mouth, french link with loose rings. Seems happy so will leave him in it till he tells me otherwise.
 
Not sure how long you've had yours but I've found with both of mine that they were fidget bums until they just accepted a contact. With Ty that was a lot of blood sweat and tears but with Oscar (who hasn't raced) it was alot easier!

Ty was in a jointed happy mouth but he needed something a little stronger so he's now in a loose ring joined snaffle - and goes well.

Oscar is in a french link but one thing I will say is that they can be a bugger to fit - if they're fitted too low they'll clank around and make horsey uncomfortable....
 
Ever since he reared up and came over on me at the age of 3 and a half, my straight-out-of racing at the time, autistic and now 19 year old TB has been in a straight bar Happy Mouth.

Not sure what the correct name for it is, but it's a bit chewed around the edges. It has lasted him 16 years so far without a repeat performance and will probably outlive him.
cool.gif
 
QR Thank you!!

Seems he may just be typical TB then!! He's just turned 8 and I've had him for just over 4 years. He had been backed at 2 and turned away and was never put into racing. I re backed him and have brought him on from scratch. He is just so gobby and never settles in his mouth unless I am riding on the buckle
tongue.gif
I always gave him the benefit of the doubt in his younger years putting it down to babyish behaviour and growing and I suppose I just hoped he would grow out of it and consistent contact would just click in to place.....alas, I am still waiting!!
confused.gif


I have tried a few different types, stainless to neue schule to sweet iron to copper enriched. French links and lozenges make no difference. A hanging cheek worked until he learnt it was good to hang on! A waterford made him worse!!!
crazy.gif


Have I just got to sit it out a bit longer??
confused.gif
confused.gif
 
The only happy mouth I tried he chewed to sharpness
frown.gif
Would have been easier to let him chew on a £20 note!!
grin.gif
 
Mine did that at 4 1/2 not nice is it.Scared my instructor more than me I was angry .He never did it again he went into shock plus he had a huge hematoma(sp) and couldnt work until it had gone down.
 
Mine must have been a good investment then! It does look a bit worn in places, but, better the devil you know!
 
Mine didnt understand my instructor rode him the once (a few months ago when he was sound )she is fantastic rider and once he understood I could get him in outline.He needed someone really strong he just didnt understand what he was being asked to do.
 
I used a straight bar Happy Mouth with cheeks for most of my old horse's working life. Now she's just a happy hacker I use a copper coated lozenge bit. Her daughter used to have a french link with cheeks or a single jointed hollow mouth snaffle but now seems to like the Happy Mouth.
 
Oooh now a myler is something I have been tempted by but a little reluctant to fork out for something that has the same doings as what I have at the moment. Will have another think
smile.gif
 
i have mine in an eggbut french link.
She also has a myler which she goes really well in for schooling but i am too lazy to keep changing the bit so mostly in french link.
Some have quite small mouths so thick bits don't seem to suit too well.
 
like any horse it depends on mouth conformation , attitude , level of schooling etc , i like a nice loose ring snaffle generally to start with , but i bit the horse according to what works , as for tbs being fussy in the mouth and fiddling , yes they often do come out of racing either pulling like tanks or very fussy and off the bridle , quiet contact and correct schooling puts that right
 
Mine had the softest happy mouth french link but she was difficult to say the least. I'm v light with my hands (IMO and instructors) but I could have NO contact or else she'd have a fit. (teeth all checked, back done every 4 months etc etc) We tried lots of soft bit but no difference. Her new owner described her as "like riding a unicycle". She now spends her life happily hacking in a headcollar as she is happier with nose pressure.

Rueysmum-Reading the "autistic " TB post, I think mine had autism. She would have been the perfect horse if we could have ridden in our own little hamster ball!!!
 
The french link seems popular. Mine's in a loose ring snaffle with a lozenge. He's been in pretty much every bit around to try and stop him crunching the bit when ridden but nothing made any difference, so we have him in what seems to work best.
 
My TB has NS lozenge loose ring. He has a very light mouth and will let me know if I'm hanging on!!
blush.gif


He loves XC and has a Wilkie snaffle.

My old warmblood had a myler and they are fantastic, it stopped him leaning on me.
 
I don't use a bit. I have a bitless bridle called the Nurtural bridle - not because I'm anti bits (other horse has a bit) but because she's happiest in it. She does have a slightly wonky jaw anyway, but I have tons more control in the bitless (no way to evade), and she's loads more relaxed.

Bit-wise, she was happiest in a loose-ring french link, but could buck for England when over-excited (and I had dubious brakes xc). She respected but hated curb bits, and was ok in gag bits but still managed to buck in them.
 
Here goes for my first posting!! Often horses that are fiddly in their mouths prefer a fixed cheek as opposed to a loose ring. I always prefer a double joint as opposed to a single joint to eliminate the nut cracker action. Often TBs have quite small mouths and just do not have room for the bulky hollowmouths etc. (one ex racehorse that I had was only a 41/2 in bit) This is is often made worse when flash straps etc are used. I would definatley try the Myler as they are very stable and not overly thick in the mouth piece. Also and I am sure you have, is get his teeth checked and also his back as if he is uncomfortable here it could well affect the way he is in his mouth. x
 
Ok so seems a fair bit of variation, so I guess I am still to find the "right" one!! He does have a fairly small mouth with a thick tongue so I have always gone for thinner mouthpieces over thick ones. Might have a look into the mylers then
grin.gif


I have found he fiddles less with an eggbutt but then has a tendancy to lean
confused.gif


He does actually go very nicely in an English hackamore.....sadly I can't use one of these for dressage
frown.gif


ETS: His teeth have been done recently and are done every 6 month. His back is due for a check but he has other ways of letting me know when this is sore
crazy.gif
 
I currently have mine in a single jointed sweet iron full cheek.
Although he does need his teeth looking at as he seems to like the bit but does not want to work into a proper contact so it may be down to his teeth.
 
You must log in or register to reply here.
Top